FlowTech Deck Drain System
Set. Adjust. Flow.
Set the drain
Stake the drain with our nylon or rebar pins and set it fast with cam locks.
Adjust the pitch
Raise or lower the drain with the cam locks to dial in pitch.
Let it flow
Pour and finish. The top cap sits flush with the deck and carries water away.
A level drain holds water. A pitched drain empties.
A drain set dead level keeps water in the line after the rain stops. That water collects debris, grows algae and can freeze.
FlowTech lets you set the pitch at the drain itself, so the line runs to the outlet and clears.
Dimensions
A slim slotted cap is all that shows in the finished deck.
6" with the sleeve fully inserted, 8-1/2" fully extended.
Build in 1/8" of pitch per foot over a 20 ft run.
Round base opening accepts 2" PVC pipe and fittings.
Two 90" drain runs per set.
Parts and SKUs
Every deck drain, corner and drainout ships with a top cap, connector pipe, alignment tab and screws.
Low Profile Deck Drain
Two 90" drain runs per set, with sleeves, top caps, connector pipes, alignment tabs and screws.
Bottom Drainout
Drops water out of the drain line into standard 2" PVC.
90° Inside Corner
Turns the drain line around an inside 90° corner.
90° Outside Corner
Wraps the drain line around an outside 90° corner.
45° Inside Corner
Turns the drain line on an inside 45° angle.
45° Outside Corner
Wraps the drain line around an outside 45° angle.
Replacement Top Caps
6-pack of interchangeable caps. Swap colors to match the deck or replace a damaged cap.
Cam Locks
20-pack. Rapidly set the drain and quickly adjust pitch.
Nylon Staking Pins
20-pack of nylon pins for staking the drain line in place.
End Caps
Left and right pair, white.
Corner Top Caps, 2-Pack
Replacement caps for inside and outside 90° and 45° corners. SKUs start with FTLP-TC. Ask the counter for your corner and color.
Ask for FlowTech at the counter.
Give the branch the SKUs above. For product or install questions, reach us directly.